Large nitrile coated work gloves vs. other work gloves: Which wins?

Protecting hands is one of the most important facets of personal protective gear (PPE) irrespective of the industry. Our hands are our most important tools, which we use in almost all activities and this means that they are always exposed to dangers like scratches, injuries, cuts, puncturations, getting exposed to chemicals, and even impact trauma. Devoid of the appropriate protection, employees are exposed not only to safety risks, but also to the lack of productivity and increased risks of accidents at the workplace.

The difference between large nitrile coated work gloves and other work gloves is not only their strength but their flexibility as well. The nitrile coating is durable and resistant to industrial risks, the large nitrile coated work gloves is a sure yet comfortable fit on workers with larger hands avoiding both limited movement and glove slippage. This safety, comfort and efficiency makes them much more than an ordinary safety product, they are a necessary tool that improves both the protection and performance in the workplace.

We are going to cover all the facts that you should know about large nitrile coated work gloves: their special advantages, their comparison with other types of gloves, their practical use in various industries, and the professional advice to find the best pair in this case. Whether you are an employer in need of cheaply purchased safety equipment in large quantities or a single person, who wants to acquire reliable protection, this article will provide you with the knowledge in order to make the right decision.

What are large nitrile coated work gloves?

Fabric-based gloves (usually cotton, polyester, or nylon) are covered with a protective layer of nitrile rubber on the palms, fingers, and occasionally all of the glove at their core. The protective layer is the nitrile coating and the fabric backing offers flexibility, breathability and comfort.

The large nitrile coated work gloves difference is particularly to accommodate the bigger-hand workers. A fitted glove is necessary not only to be comfortable, but also to be safe and effective at the workplace. Tight gloves lock movement and loose gloves add to chances of tool drops or poor handling of tools. Large nitrile coated work gloves hits the jack of all trades as they provide a secure fit without loss of dexterity.

Large nitrile coated work gloves are very resistant to:

• Abrasions and punctures

• Oils, greases, and solvents

• Some chemicals and factory liquids.

• General wear and tear during long use

Large nitrile coated work gloves are stronger, chemical-resistant, and hypoallergenic compared to natural latex, which makes it effective to use when natural latex allergies occur in workers. This package of safety, comfort, and durability is why large nitrile coated work gloves are rated among the highest grade gloves to use in both heavy-duty tasks and precision tasks.

1. Grip & slip resistance

The grip of a glove may break or make productivity and safety at the workplace. Employees who handle bulky tools, greasy substances or oily equipment must have gloves which will not allow objects to drop out of hand. Poor grip does not only slow things down, but it can also result in accidents in the workplace. Let’s compare:

• Cotton gloves: Cotton is easy to wear and offers a very low level of grip. Cotton gloves cannot be relied upon in industries or in mechanical work under the influence of moisture, oil, dust etc. they lose traction easily. They fit best light and dry jobs that have low risk.

• Latex-coated gloves: Latex has fair grip on dry surfaces, it becomes oily in contact with oils or grease. Latex-coated gloves would not serve in this case as in other industries such as the automotive or machine maintenance where the workers have to reposition their grip.

• PVC covered gloves: PVC has the capability of working in wet conditions compared to latex, as it provides a firmer grip on wet surfaces. Nevertheless, PVC coatings are hard and cumbersome, and this restricts the sense of dexterity. This renders them less useful with precision tasks like handling of small tools or work on an assembly line.

• Nitrile-coated gloves: Large nitrile coated work gloves are large in size and offer better grip in all conditions dry, wet, and oily. The textured nitrile surface establishes a sticky, but resilient material that assists workers in holding on to tools, components, and materials. This is especially useful in the industries such as:

-Carmobile repair, where there is grease and oil-covered screws.

-Warehousing In warehousing, employees are required to work with smooth cardboard, plastic-packed pallets, or smooth metal packages.

-Construction, where grip is needed to carry lumber, bricks or metal beams.

Unlike PVC, large nitrile coated work gloves are flexible meaning that workers do not need to trade accuracy in favor of safety. This is a combination of grip and agility that makes nitrile-coated gloves one of the surest bets in any strenuous workplace.

2. Oil & chemical resistance

Oil, fuel, and chemical resistance is another important glove performance aspect. Employees in the manufacturing sphere, automotive, and heavy industry settings are regularly exposed to substances that can easily tear the ordinary gloves. This is the comparison of the types of gloves:

• Cotton/Leather gloves: These gloves are inexpensive, and they offer no resistance to oil and chemicals. They soak up liquids very readily, and grow heavy, greasy, and even perilous. When saturated, they do not and cannot protect and should be removed at once.
• Latex-coated gloves: Latex is better than cotton or leather yet, it wears out fast when exposed to oils, solvents or strong chemicals. This renders the utilization of latex-covered gloves inappropriate in long-term applications in auto stores, chemical factories, or factories.
• PVC coated gloves PVC is good protection against water and some oils, but does not have the tough chemical resistance that a heavy-duty environment would require. The coating may also be weakened by exposure to solvents and industrial chemicals, thereby decreasing the life of the glove.
• Nitrile-coated: Large nitrile coated work gloves are very effective in areas where there are exposures to oil and chemicals. The synthetic rubber composition of nitrile is resistant to oils, fuels and a wide variety of solvents and chemicals and does not disintegrate. This renders them the choice in the industries like

-Automotive/mechanical repair where gloves have to be tough enough to withstand continuous contact with engine oils/lubricants/fuels.

-The manufacturing industry and metalworking where cutting fluids, solvents and industrial oils are prevalent.

-The heavy industry and work with chemicals where security against spills, splashes and dangerous substances are non-negotiable.

Large nitrile coated work gloves do not swell, crack or weaken when in contact with oils and solvents unlike latex. And it is light and soft, flexible, even when worn over a long while, in contrast to PVC. Large nitrile coated work gloves are a better fit to workers with bigger hands and offer the extra room and comfort required without compromising the full chemical and oil resistance.

3. Durability & abrasion resistance

In the case of work gloves, durability may mean the difference between a productive workday and the frequent disruption of a workday by ripped gloves. Wearing gloves that become worn easily not only costs more to buy but also exposes the workers to cut risk, puncture or exposure to harmful substances. It is as follows in comparison of the types of gloves:

• Cotton gloves: Cotton gloves are light weight and breathable but not suitable when it comes to work requiring heavy duty. They cut up very simply on rough surfaces such as bricks, lumber or sharp objects. When used in a construction or warehouse setting, cotton gloves usually take up between two and three days before replacement.

• Leather gloves: Leather gloves are tough and they are able to withstand abrasion compared to cotton. They are, however, bulky, less breathable and heavy, limiting dexterity. Leather may also become rigid, crack, or dry out in the long run- particularly when it comes in contact with water or oils.

• Latex-coated gloves: The latex igniments are gripping but easily punctured or cut by a sharp edge such as metal or glass. This makes them less effective in the case of challenging jobs where durability is vitally important.

• PVC-coated gloves: These gloves are water and some chemical resistant and more durable than cotton or latex. But they are not flexible and therefore might get uncomfortable when doing repetitive motion or precise work.

• Nitrile-coated gloves: Large nitrile coated work gloves are the best of both worlds high durability and lasting flexibility. The synthetic rubber makeup of nitrile is so resistant to abrasions, puncture and tear even in rough industrial environments. Be it heavy materials you are lifting, sharp tool work, or brash surface, the large nitrile coated work gloves hold up much longer than the cotton, latex, or PVC based counterparts. This translates to fewer replacements, reduced shutdowns and enhanced security of your hands. Large nitrile coated work gloves have the added advantage of being securely fitted to workers with large hands, since the coating does not weaken movement.

4. Comfort & flexibility

Durability is of value, and so is comfort, particularly to those workers who wear gloves throughout the day (8-12 hours). Squeezy, hot, and tight gloves may be tiresome, less productive, and even de-motivating to use regularly. This is the hierarchy of the different types:

• Cotton gloves: They are light weight and breathable hence comfortable to use in the short term. But since they are not coated as they offer inadequate protection in extreme environments, their usage is restricted only to very light operations.

• Gloves of leather: Leather gloves are durable and can be heavy and stiff, particularly on long shifts. They trap the heat and they cut air, therefore, are uncomfortable and hot in hot climates. Their inflexibility also minimizes the ability to perform delicate things.

• Latex covered gloves: Latex is flexible, offers good fit however some users are allergic to it. Moreover, latex does not resist oils and chemicals and this constrains its comfortability in the long run as gloves rot faster.

• PVC-coated gloves: These are those gloves which are good in protection but not breathable. They are sweaty and uncomfortable to the workers during long usage and are difficult to perform fine motor tasks due to their rigidity.

• Nitrile-coated gloves: Now we have the nitrile-coated gloves that shine. Breathable, the liner is usually polyester, cotton, or nylon, and keeps sweat at bay, whereas the nitrile coating provides flexibility and grip. As opposed to leather or PVC, nitrile is lightweight and has a natural tendency to bend with hands. To employees who have big hands, large nitrile coated work gloves fit securely and yet loosely, avoiding the tightness and confinement that other glove materials impose. Such a combination provides comfort and functionality to the workers who can be and remain safe, but still have a complete range of motion even on long shifts or during accuracy-oriented activities.

5. Cost-effectiveness

Cost is never ignored when it comes to work gloves- however, it is not about the price itself. The real cost-effectiveness of the gloves is based on their life span, their performance levels and the time they take to get substituted. Let’s break it down:

• Cotton gloves: They are cheapest at the beginning, however, they wear out very fast. In work-intensive situations, cotton gloves can be torn or lose their usefulness in a few days. In the long run, the expenses of having to purchase substitutes are more expensive than spending money on long-lasting gloves.

• Leather gloves: Leather gloves are durable, however, they are usually very costly and unnecessary in lighter tasks. They are also cumbersome, not breathable and may stiffen or even be uncomfortable after some time of use. Their lack of versatility will mean you are paying more besides the fact that they do not necessarily fulfill all the tasks specifications.

• Latex-coated gloves: Latex gloves are cheap at the outset and provide a good grip, however, they wear out easily. When subjected to oils, chemicals, or sharp edges they degrade rapidly, so they must be replaced more frequently- again increasing the total ownership cost.

• Gloves with a PVC coating: These are relatively expensive, but offer fair water and partial resistance to oil. Yet, they are less flexible and comfortable, which makes them less convenient in various forms of duties. This weakness frequently compels employees to purchase other forms of gloves to carry out the task that PVC gloves are not able to execute efficiently.

• Nitrile-coated gloves: here the affordability and durability balance acts. The high-quality nitrile coated work gloves not only cost competitively, but they also have a much longer lifespan compared to cotton, latex or even a few leather gloves. They are poked, oily, and even abrasive-resistant, which diminishes the number of replacements and saves money in the long-term. To top it all, they are versatile and can facilitate various activities- construction, automotive work, warehousing, or even DIY- without having to use specialized gloves in different situations. Concisely, nitrile-coated gloves provide the greatest ROI to the companies and individuals.

Read more: 7 reasons why latex coated gloves are a must-have for workers

Final thoughts

At EvridWear, we believe that large nitrile coated work gloves are the obvious winner among workers with bigger hands, or where the work requires oil resistance, durability, and all-day comfort. They provide the optimal balance of protection and performance and they are:

• The permeability of cloth linens to ensure the comfort of hands

• The hardness of the nitrile covering against cuts, puncture, oils and chemicals

• A snug fit in large sizes, making freedom of movement to be without discomfort

• They are cost-effective due to their long life, and industry adaptability

You may be on a construction site with heavy materials, in an automotive garage with greasy parts, or loading and unloading in a warehouse, or doing any other hard work in manufacturing and heavy industry, large nitrile coated work gloves will offer the strong protection you want.

The option of these gloves to both employers and individual workers implies that fewer injuries will occur and the costs of new gloves will be less and the productivity will be higher. In a word, work gloves covered with nitrile are not another variant of PPE, but a key to safe, effective, and affordable working.